| Tips | Confessions | Projects | Lessons | Quilt Shops |
| Links | Glossary | Patterns for Sale | Home | |
There are 2 different blocks in the design...this is Block #2. You will be making 17 of this block. I hope you've all followed the pressing instructions up to this point...I spent a lot of time plotting the pressing of the strata so that the separate sections would go together and then the blocks will go together with "butted" seams.
| Step | Directions |
| 1 | Attach an HST to either side of 34 QSTs as shown...press toward HSTs. (Diagram 4.1) |
| 2 | Attach a QST to either side of 17 2-1/2" squares of Light...press toward Light squares. (Diagram 4.2) |
| 3 | Attach rows from step#1 to either side of rows from step#2...press toward outer rows. (Diagram 4.3) |
| 4 | Square up new block to 6-1/2". |
| 5 | Attach strata Section E to opposite sides of unit from step#4...press toward strata units. (Diagram 4.4) |
| 6 | Attach strata Section D to other 2 sides of unit from step#5...press toward strata just attached. (Diagram 4.5) |
| 7 | Square up to 10-1/2"...you should have 17 Block#2. |
![]() Diagram 4.1 |
![]() Diagram 4.2 | |||
![]() Diagram 4.3 |
![]() Diagram 4.4 | |||
![]() Diagram 4.5 |
||||
Are they all the same size??? Make sure! See you at 2pm!
| General | Part 1 | Part 2 | Part 3 | Part 5 | Part 6 | Part 7 |
© March 2001 Quiltaholics
Holliston, MA
http://www.quiltaholics.com